Product List
Contact Us

Lebao Blow Molding Machine  

  • TEL: +86-576-84190622 84168726
  • FAX: +86-576-84190945
  • Attn: Mrs. Jenna Xiang
  • WeChatAPP: 13757670304 Mr.Alex Hu
  • E-mail: sales@chinalebao.com  
  • URL: www.lebao.cn  
  • ADD: Yonggu Road, Jiangkou, Huangyan, Taizhou, Zhejiang, China
You are here: Home > Products > PET Injection Molding Machine
PRODUCTS

PET Injection Molding Machine - -> Total 3 Product

PET Injection Molding Machine
1. PET Injection Molding Machine (L-BW50)

Features:
The automatic injection molding machine is used to produce of faster speed, higher precision, and outstanding performance versus cost ratio. The machine can meet a majority of precisions' requirements, and can produce products with superior exterior and high quality, shch as  electron, computer, mobile phone, automobile parts, high-class household electrical appliances, container and so on.
The whole line includes the following systems: injecton systeml; hydraulic system, electrical system, clamping system, and etc.
This line has been exported to many countries including Russia with very stable quality and good Requtation.
Technical Specifications:

Model   L-BW50 L-BW80 L-BW110 L-BW120 L-BW130
Screw Code - A B C A B C A B C A B C A B C
Screw Diameter mm 25 28 30 32 35 38 38 40 42 38 40 42 40 42 45
Injection Pressure Mpa 184 168 147 186 170 144 188 168 152 187 170 154 190 174 151
Shot Weight (PS) g 45 53 61 90 100 130 132 158 175 170 183 208 200 224 257
Screw L:D - 22:1 20:1 18:1 21:1:6:1 20:5:1 19:3:1 22:1 20:1 18:1 22:1 20:1 18:1 22:1:1 20:1 18:1
Screw Stroke mm 102 135 150 170 191
Screw Speed r.p.m 0-320 0-200 5-180 10-170 5-170
Injection Rate cm3/sec 24.5 32.4 40 78 90 20-60 116 120 122 118 122 124 119 123 125
Plasticizing Capacity g/sec 4 4.5 5.2 9.8 14 18 19.3 20.2 22.3 19.2 20.1 22 20 21 22.5
Type Of Clamping Units -
Clamping Force tons 50 80 110 120 130
Mould Clamping Stroke mm 255 300 320 375 375
Max Daylight Opening mm 605 650 700 775 805
Mould Thickness(Min-Max) mm 150-350 130-350 150-380 150-400 150-430
Space Between Tie Bar(W×H) mm 280×260 350×350 385×350 375×415 420×420
Hydraulic Ejection Force tons 2.2 2.7 3.0 3.8 3.8
Hydraulic Ejection Stroke mm 65 100 80 110 115
System Pressure Mpa 14 14 16 16 16
Pump Driving Motor Kw 5.5 9 11 13 13
Heater Capacity Kw 2.3 6 6.3 6.3 6.3
Temperature Control Zones - 3+1 3+1 3+1 3+1 3+1
Tank Capacity L 160 180 180 220 220
Machine Dimension(L×W×H) mm 3600×1100
×1700
3800×1200
×1700
3850×1260
×1780
3940×1280
×1795
4150×1290
×1800
Machine Weight tons 2.8 3 3.5 4.2 4.5
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.

Model   L-BW170 L-BW220 L-BW280 L-BW380
Screw Code - A B C A B C A B C A B C
Screw Diameter mm 42 45 50 48 52 55 55 60 65 65 70 75
Injection Pressure Mpa 225 188 158 211 180 160.8 216 182 155 218 185 156
Shot Weight (PS) g 287 320 407 432 510 570 654 779 890 966 1120 1286
Screw L:D - 22:1 20:1 18:1 22:1 20:1 18:1 22:1 20:1 18:4:1 21:6:1 20:1 19:1
Screw Stroke mm 245 281 322 315
Screw Speed r.p.m 0-170 0-170 0-160 5-200
Injection Rate cm3/sec 120 125 130 136 168 203 207 246 270 275 318 365
Plasticizing Capacity g/sec 20 22.7 23 20 25 30 30 36 40 45 52 60
Type Of Clamping Units -
Clamping Force tons 170 220 280 380
Mould Clamping Stroke mm 435 470 550 680
Max Daylight Opening mm 935 1050 1170 1400
Mould Thickness
(Min-Max)
mm 180-500 200-500 230-620 250-720
Space Between Tie Bar(W×H) mm 460×460 510×510 580×580 710×710
Hydraulic Ejection Force tons 4.5 7.0 7.0 11
Hydraulic Ejection Stroke mm 130 135 145 200
System Pressure Mpa 16 16 16 16
Pump Driving Motor Kw 15 18.5 22 37
Heater Capacity Kw 7.5 11 14 19
Temperature Control Zones - 3+1 4+1 4+1 5+1
Tank Capacity L 350 400 500 1000
Machine Dimension
(L×W×H)
mm 4920×1290
×1810
5400×1550
×1950
5800×1650
×2050
7180×1950
×2600
Machine Weight tons 5.2 8.5 11 11.5
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.

Model   L-BW480 L-BW580 L-BW700 L-BW800
Screw Code - A B C A B C A B C A B C
Screw Diameter mm 70 75 85 75 80 85 85 90 100 90 100 110
Injection Pressure Mpa 212 184 143 210 185 164 219 195 158 225 182 150
Shot Weight (PS) g 1280 1469 1887 1571 1778 2018 2174 2438 3010 2702 3336 4037
Screw L:D - 23:5:1 22:1 19:4:1 22:1 20.5:1 19.3:1 21:1 20:1 18:1 22:1 20:1 18:1
Screw Stroke mm 360 385 415 460
Screw Speed r.p.m 5-150 5-130 5-120 5-130
Injection Rate cm3/sec 323 371 365 351 400 451 486 545 673 540 667 807
Plasticizing Capacity g/sec 49 58 60 59 68 86 64 72 89 65 80 95.8
Type Of Clamping Units -
Clamping Force tons 480 580 700 800
Mould Clamping Stroke mm 750 850 900 1000
Max Daylight Opening mm 1550 1700 1900 2000
Mould Thickness(Min-Max) mm 300-800 350-850 400-900 450-1000
Space Between Tie Bar(W×H) mm 810×785 860×860 920×920 1000×1000
Hydraulic Ejection Force tons 15 16.6 18 20
Hydraulic Ejection Stroke mm 200 250 285 260
System Pressure Mpa 17.5 16 16 16
Pump Driving Motor Kw 18.5+30 18.5+37 37+37 37+45
Heater Capacity Kw 24.7 28 30 36
Temperature Control Zones - 6+1 6+1 6+1 7+1
Tank Capacity L 950 1300 1300 1800
Machine Dimension(L×W×H) mm 8600×2200×2400 9400×2300×2800 9700×2800×3290 10300×2700×3290
Machine Weight tons 22 32 35 48
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.
Category: Plastic Injection Molding Machine > L-BW50 Injection Molding Machine
Tages: Injection Molding Machine | PET Injection Molding Machine | Plastic Injection Molding Machine | Injection Machine | Plastic Injection Machine
Injection Molding Machine
2. Injection Molding Machine (L-BW120)

Features:
The automatic injection molding machine is used to produce of faster speed, higher precision, and outstanding performance versus cost ratio. The machine can meet a majority of precisions' requirements, and can produce products with superior exterior and high quality, shch as  electron, computer, mobile phone, automobile parts, high-class household electrical appliances, container and so on.
The whole line includes the following systems: injecton systeml; hydraulic system, electrical system, clamping system, and etc.
This line has been exported to many countries including Russia with very stable quality and good Requtation.
Technical Specifications:

Model   L-BW50 L-BW80 L-BW110 L-BW120 L-BW130
Screw Code - A B C A B C A B C A B C A B C
Screw Diameter mm 25 28 30 32 35 38 38 40 42 38 40 42 40 42 45
Injection Pressure Mpa 184 168 147 186 170 144 188 168 152 187 170 154 190 174 151
Shot Weight (PS) g 45 53 61 90 100 130 132 158 175 170 183 208 200 224 257
Screw L:D - 22:1 20:1 18:1 21:1:6:1 20:5:1 19:3:1 22:1 20:1 18:1 22:1 20:1 18:1 22:1:1 20:1 18:1
Screw Stroke mm 102 135 150 170 191
Screw Speed r.p.m 0-320 0-200 5-180 10-170 5-170
Injection Rate cm3/sec 24.5 32.4 40 78 90 20-60 116 120 122 118 122 124 119 123 125
Plasticizing Capacity g/sec 4 4.5 5.2 9.8 14 18 19.3 20.2 22.3 19.2 20.1 22 20 21 22.5
Type Of Clamping Units -
Clamping Force tons 50 80 110 120 130
Mould Clamping Stroke mm 255 300 320 375 375
Max Daylight Opening mm 605 650 700 775 805
Mould Thickness(Min-Max) mm 150-350 130-350 150-380 150-400 150-430
Space Between Tie Bar(W×H) mm 280×260 350×350 385×350 375×415 420×420
Hydraulic Ejection Force tons 2.2 2.7 3.0 3.8 3.8
Hydraulic Ejection Stroke mm 65 100 80 110 115
System Pressure Mpa 14 14 16 16 16
Pump Driving Motor Kw 5.5 9 11 13 13
Heater Capacity Kw 2.3 6 6.3 6.3 6.3
Temperature Control Zones - 3+1 3+1 3+1 3+1 3+1
Tank Capacity L 160 180 180 220 220
Machine Dimension(L×W×H) mm 3600×1100
×1700
3800×1200
×1700
3850×1260
×1780
3940×1280
×1795
4150×1290
×1800
Machine Weight tons 2.8 3 3.5 4.2 4.5
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.

Model   L-BW170 L-BW220 L-BW280 L-BW380
Screw Code - A B C A B C A B C A B C
Screw Diameter mm 42 45 50 48 52 55 55 60 65 65 70 75
Injection Pressure Mpa 225 188 158 211 180 160.8 216 182 155 218 185 156
Shot Weight (PS) g 287 320 407 432 510 570 654 779 890 966 1120 1286
Screw L:D - 22:1 20:1 18:1 22:1 20:1 18:1 22:1 20:1 18:4:1 21:6:1 20:1 19:1
Screw Stroke mm 245 281 322 315
Screw Speed r.p.m 0-170 0-170 0-160 5-200
Injection Rate cm3/sec 120 125 130 136 168 203 207 246 270 275 318 365
Plasticizing Capacity g/sec 20 22.7 23 20 25 30 30 36 40 45 52 60
Type Of Clamping Units -
Clamping Force tons 170 220 280 380
Mould Clamping Stroke mm 435 470 550 680
Max Daylight Opening mm 935 1050 1170 1400
Mould Thickness
(Min-Max)
mm 180-500 200-500 230-620 250-720
Space Between Tie Bar(W×H) mm 460×460 510×510 580×580 710×710
Hydraulic Ejection Force tons 4.5 7.0 7.0 11
Hydraulic Ejection Stroke mm 130 135 145 200
System Pressure Mpa 16 16 16 16
Pump Driving Motor Kw 15 18.5 22 37
Heater Capacity Kw 7.5 11 14 19
Temperature Control Zones - 3+1 4+1 4+1 5+1
Tank Capacity L 350 400 500 1000
Machine Dimension
(L×W×H)
mm 4920×1290
×1810
5400×1550
×1950
5800×1650
×2050
7180×1950
×2600
Machine Weight tons 5.2 8.5 11 11.5
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.

Model   L-BW480 L-BW580 L-BW700 L-BW800
Screw Code - A B C A B C A B C A B C
Screw Diameter mm 70 75 85 75 80 85 85 90 100 90 100 110
Injection Pressure Mpa 212 184 143 210 185 164 219 195 158 225 182 150
Shot Weight (PS) g 1280 1469 1887 1571 1778 2018 2174 2438 3010 2702 3336 4037
Screw L:D - 23:5:1 22:1 19:4:1 22:1 20.5:1 19.3:1 21:1 20:1 18:1 22:1 20:1 18:1
Screw Stroke mm 360 385 415 460
Screw Speed r.p.m 5-150 5-130 5-120 5-130
Injection Rate cm3/sec 323 371 365 351 400 451 486 545 673 540 667 807
Plasticizing Capacity g/sec 49 58 60 59 68 86 64 72 89 65 80 95.8
Type Of Clamping Units -
Clamping Force tons 480 580 700 800
Mould Clamping Stroke mm 750 850 900 1000
Max Daylight Opening mm 1550 1700 1900 2000
Mould Thickness(Min-Max) mm 300-800 350-850 400-900 450-1000
Space Between Tie Bar(W×H) mm 810×785 860×860 920×920 1000×1000
Hydraulic Ejection Force tons 15 16.6 18 20
Hydraulic Ejection Stroke mm 200 250 285 260
System Pressure Mpa 17.5 16 16 16
Pump Driving Motor Kw 18.5+30 18.5+37 37+37 37+45
Heater Capacity Kw 24.7 28 30 36
Temperature Control Zones - 6+1 6+1 6+1 7+1
Tank Capacity L 950 1300 1300 1800
Machine Dimension(L×W×H) mm 8600×2200×2400 9400×2300×2800 9700×2800×3290 10300×2700×3290
Machine Weight tons 22 32 35 48
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.
Category: Plastic Injection Molding Machine > L-BW120 Injection Molding Machine
Tages: Injection Machine | Injection Molding Machine | PET Injection Molding Machine | Plastic Injection Molding Machine
Injection Molding Machine
3. Injection Molding Machine (L-BW50,L-BW80,L-BW110...)






Category: Plastic Injection Molding Machine > L-BW50,L-BW80...Injection Molding Machine
Tages: Injection Molding Machine | PET Injection Molding Machine | Plastic Injection Molding Machine | Injection Machine | Plastic Injection Machine
China Blow Molding Machine, PET Preform, PET Preform Mould Manufacturer,Supplier.
Home | About Lutian | Products | Making Flow Chart | Exhibitions | Service | Inquiry Online | Contact us | Site Index | Chinese  
Copyright © 2015-2016 Zhejiang Lebao Plastics Equipment Factory Designed by Haibo Network Inc.